Output

Installed Capacity

Actual Capacity

Voltage / Frequency

Dimension

Workers Required

100-150kg/hr

70kw

45kw

380V / 50Hz

1700 x 500 x 300cm

3-4 workers

No.  

Flour Mixer

1.Output: 50kg/load

2.Power: 4kw

3.Tank Size: φ470 x 450mm

4.Dimension：720 x 510 x 1050mm

Flour Mixer is used to mix the raw material, like corn flour, rice flour, fish bone flour, ox bone flour with liquid and other additives. 

1、Stainless steel structure, especially the parts in contacting with the raw material or products;

2、Cover small area, easy cleaning, and operate stably.

Screw Conveyer

1.Driving Power: 1.1kw

2.Vibrating Power: 0.03kw

3.Dimension: 2900 x 1000 x 3100mm

Screw Conveyer is used to the convey the materials to the feeder of the extruder.

1、Stainless steel structure, especially the parts in contacting with the raw material or products;

2、The materials is conveyed in a sealed stainless steel roller to the feeding hopper of extruder without leaking, dust pollution;

3、Equipped with vibrating sifter to feed the materials stably and evenly;

4、Easy cleaning and operation; run stably.

DRD-100 Single Screw Extruder

1.Output: 100kg/hr

2.Extruder Dimension: 2850 x 900 x 2100mm

Feeding System:

1.Feeding power: 0.75kw

2.Feeding screw diameter: 55mm

3.Feed Screw Speed: 0-150rpm

Driving & Extruding System:

1.Main Motor Power: 30kw

2.Main Screw Length: 2570mm

3.Main Screw Diameter: 100mm

4.Main Screw Speed: 0-250rpm

5.Heating Zone: 5 zone

6.Heating Power: 2kw x 7 = 14kw (7 heating rings)

Control System:

Electric Cabinet Dimension: 630 x 470 x 1740mm

DRD-100 Single Screw Extruder serves to gelatinize flours and starches continuously and automatically.

After dosing, the materials are worked by one screw composed by sectional modules for the following functions: forward and backward transport, mixing, feeding of additives, injection of liquids, de-gassing, cooking and forming. 

1、PLC and 10” touch screen with friendly interface to control the whole line, not one or two single equipment;

2、While any parts got problems, the fault alarm will be shown on the touch screen;

3、Password can be set on the touch screen to avoid any misoperation by the workers;

4、A wide range of products can be obtained in a variety of different ways, and can configure various dies simply and rapidly;

5、The use of a continuous automatic process provides greater production outputs than offered by traditional systems, with savings in energy and reduced management cost;

6、Automatic dosing unit for utilization with any type of flours and starches (the size should be 60-80 mesh);

7、The screw is all made by 38CrMoALA alloy, and the surface is being processed nitrogen treatment, so the hardness could reach 55hrc, which is hard and strong, and has longer service life;

8、Auto-temperature control system; make the temperature controlling more direct viewing and the parameter more precise;

9、Equipped wit cooling system for cooling the barrel and screw;

10、Control cabinet has three kinds of protections: overload protection, overcurrent protection and overheat protection.

11、Nice appearance with streamline modelling.

HQS Pulling & Cutting Machine

1.Power: 1.5kw

2.Dimension: 1800 x 600 x 950mm

HQS Pulling & Cutting Machine is for the cutting of tube shape pellets. 

1、Shape the extruded materials to keep it in good appearance;

2、To avoid sticking together and to cut into required length;

3、Sharp cutter is made by special alloy, with longer service life;

4、Easy operation and maintenance, work stably.

Cutting Machine

CUTTER MACHINE HEAD (for length pipe bevel connection)

1.Cutting power:1.5kw

2.Inverter :1.5kw/0.75kw

3.Dimension:600X400X1200mm

4.Voltage: 380V 50HZ Three Phase

1、Outer cover material: 201 stainless steel 

2、Carriage material: Carbon steel 

3、Equipment composition: Cover sheet metal stainless steel + stainless steel frame + motor + control switch + Movable wheel
Working principle: Cutter is a kind of motor driven belt to move the product to cut shape

4、Function：This machine is used for cutting macaroni. It can cut straight and diagonal in many styles and patterns when the cutter is changed. The machine is simple to operate and can be operated by ordinary personnel. The series of Cutter is made of high temperature resistant wear-resistant material, with good heat resistance, no deformation, long life characteristics, easy to clean.

VIBRATE FEEDER

1.Capacity: match for extruder 

2.Motor power:0.2KW(0.1KW*2)

3.Rated current:0.32A

4.Motor rotate speed:1410r/min

5.Overall dimensions: 2100x700x900mm

6.Weight:about 200kg

1、Outer cover material:    201 stainless steel 

2、Carriage material: Stainless steel 

3、Motor: stepping motor (China top brand)

4、Equipment composition: Cover sheet metal stainless steel + stainless steel frame + motor + control switch + Movable wheel

Big Hoist

1.Power: 0.37kw

2.Rotary speed: 85rpm

3.Weight: 200kg

4.Dimension: 2500 x 800 x 2200mm

Big Hoist is a conveyer, which is used to convey the raw materials to next equipment.

1、The conveying belt is made by materials which meeting food standards;

2、Conveying speed can be adjustable;

3、Easy operation and maintenance, work stably.
The frame uses 100 x 50mm stainless steel, which is more stable and nicer appearance.

Five-layer Roaster

1.Driving Power: 3.75kw

2.Fan Power: 2.2kw x 2 = 4.4kw

3.Dimension: 8300 x 1100 x 2300mm

4.Electric Cabinet Dimension: 600 x 340 x 1220mm

Electric Type:

Heating Power: 45kw

Gas Type:

1.Gas Consumption: 12-16m3/hr

2.Burner Brand of Gas / Oil Roaster: BALTUR, Italy

Five-Layer Roaster is used to dry a wide range of products, such as dog snacks, corn flakes, core filling food, etc.

1、Five layer structure can prolong the drying time and reduce the coverage area;

2、Each layer is made of mesh belt with stainless steel;

3、Side guard to prevent products falling from the belt;

4、Various speed inverter drives for five layers;

5、Auto temperature control system with the temperature range between 15-180℃;

6、The body is well sealed to prevent any heating leakage, and thus reduce the savings in energy;

7、Equipped with special thermal-protective coating to prevent any burnt or scald to the workers

8、Three kinds of power available: Electric, gas or oil.

LQX-5 Cooing conveyer

1.Driven power: 0.37kw

2.Fan power: 0.24kw

3.Voltage: 380v

4.Dimension: 5000 x 800 x 1200mm

5.Weight: 200KG

LQX-5 Cooling conveyer is used to cool the pet snacks after cutting, ready to be roasted in the oven.

1、The whole machine is made of stainless steel. On the top there's net belt, which convey the extruded chewing to forward. 

2、Above the net belt, there are fans to make the extruded chewing bone cooling down.
 

LSU-520A Packing Machine

1.Packing Speed: 10-60pcs/min

2.Bag Length: 80-350mm

3.Bag Width: 80-250mm

4.Bag Volume: Max. 2000ml

5.Power: 6kw

6.Dimension:4076 x 4045 x 3500mm

7.Weight: 2000kg

LSU-520A Packing Assemble is suitable for packing the high accuracy and easy fragile material, like puffy food, snacks, pet food etc. 

1、Fully automatic and continuous, and easy to connect with other processing machinery;

2、Combined many functions into one: Conveying materials – Weighing materials – Making bags – Filling materials – Filling air or nitrogen (needs additional Air compressor or Nitrogen Generator) – Sealing bag – Printing date & code – Making holes – Conveying final bags;

3、PLC and touch screen control; 

4、High precision with weight error of 0.3-1.5g;

5、High efficiency without crashing the materials;